Notice: Authorized Dealers please log in thru your Internal Dealer Network via TIS:   More Info

Click on: TIS > DIAGNOSTICS > TOOLS & EQUIPMENT > APPROVED DEALER EQUIPMENT WEBSITE
product product Item shown may not be actual product.
Product and price information are subject to change without notice.
Discontinued

10,000LB Symmetric Lift with Flip Up Adapters


Item Number: ROTSPO10    Supplier: ROTARY LIFT

Description

For decades, Rotary® has been the recognized leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market. With Rotary lifts, you have the service and support you need. Our world-wide network of service companies are always standing by.

Most of our lifts are third party tested by ETL and certified by ALI to meet or exceed strict ANSI standards such as cable cut and deformation tests. Be sure the lift you buy has the gold ALI/ETL label that assures your lift has been tested to meet these standards.

Features

  • True symmetric column design
  • “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
  • Single point lock release which releases the locks at the same time
  • Two full stroke cylinders, one in each column
  • Arm restraints on each arm engage when the vehicle is lifted
  • Third party certified

Warranty

One year for parts and labor.  Additional one-year parts warranty if installed by a Rotary-Authorized Installer (RAI) 

Product Specifications

  • Rise : 72-5/8" - 78-1/8" (1845 mm - 1984 mm)
  • Height Overall (Standard): 11' 8-1/2" (3569 mm)
  • Width Overall : 11' 5-1/2" (3493 mm)
  • Drive-Thru Clearance: 102-1/2" (2603 mm)
  • Floor to Overhead Switch: 11' 2-3/4" (3423 mm)
  • Reach (Front Arm Minimum): 31" (787 mm)
  • Reach (Front Arm Maximum): 54" (1372 mm)
  • Low Step Height: 7" (178 mm)
  • High Step Height: 10-1/4" (260 mm)
  • Inside Columns: 114-1/2" (2908 mm)
  • Cylinder Height at Full Rise: 11' 10-3/4" (3626 mm)
  • Lifting Capacity: 10,000 lbs. (4536 kg)
  • Motor / Voltage: 2 HP / 208V-230V
  • Time of Full Rise: 45 Seconds
  • Ceiling Height Required (Standard): 12' (3658 mm)
  • Max Load Per Arm: 2,500 lbs. (1134 kg)
  • Minimum Bay Size: 12' x 24' (3658 x 7315 mm)
  • Reach (Rear Arm Minimum): 31" (787 mm)
  • Reach (Rear Arm Maximum): 54" (1372 mm)
  • Minimum Adapter Height: 4-5/8" (118 mm)