Item shown may not be actual product.Product and price information are subject to change without notice.
Discontinued
Automotive Oscilloscope, TMS Branded
Item Number: PIOPR277
Supplier:
PICO TECHNOLOGY
Description
A PicoScope (sometimes known as a labscope) turns your laptop or desktop PC into a powerful diagnostic tool. Think of it as the X-ray machine of diagnostics, letting you see the changing signals inside wires. You can purchase a PicoScope on its own, but most people purchase one of our award-winning Automotive Diagnostics Kits. These money-saving kits contain everything you need – just add a PC.
Warranty
Five years
Specifications
| Oscilloscope specifications (vertical) | |
| Bandwidth | 20 MHz (10 MHz on ±50 mV range) |
| Channels | 4 |
| Vertical resolution | 12 bits |
| Enhanced vertical resolution | 16 bits |
| DC accuracy | ±1% of full scale |
| Input Sensitivity | 10 mV/div to 40 V/div |
| Input ranges (full scale) | ±50 mV to ±200 V in 12 ranges |
| Input characteristics | 1 MΩ in parallel with 24 pF |
| Input type | Floating single-ended BNC connector |
| Input coupling | Software selectable AC/DC |
| Overvoltage protection | ±2500 V (DC + AC peak) |
| Oscilloscope — horizontal | |
| Maximum sampling rate | |
| 1 channel in use | 400 MS/s |
| 2 channels in use | 200 MS/s |
| 3 or 4 channels in use | 100 MS/s |
| Maximum sampling rate (USB streaming) | 20 MS/s (USB 3.0) |
| 10 MS/s (USB 2.0) | |
| Buffer memory | 250 M samples |
| Waveform buffer | Up to 10,000 waveforms |
| Timebase ranges | 100 ns/div to 5000 s/div |
| Dynamic performance (typical) | |
| Crosstalk | 4000:1, DC to 20 MHz |
| Harmonic distortion | < −60 dB |
| SFDR | > 60 dB |
| Noise | 220 μV RMS on 50 mV range |
| Bandwidth flatness | DC to full bandwidth (+0.25 dB, −3 dB) |
| ADC ENOB | 10.8 bits |
| Triggers | |
| Source | Any input channel |
| Basic triggers | Auto, repeat, single, none |
| Advanced triggers | Rising edge, falling edge, edge with hysteresis, pulse width, runt pulse, dropout, windowed |
| Maximum pre-trigger delay | Up to 100% of capture length |
| Maximum post-trigger delay | Up to 4 billion samples |
| Spectrum analyzer | |
| Frequency range | DC to 20 MHz |
| Display modes | Magnitude, average, peak hold |
| Windowing functions | Rectangular, Gaussian, triangular, Blackman, Blackman-Harris, Hamming, Hann, flat-top |
| Number of FFT points | Selectable from 128 up to 1 million in powers of 2 |
| Scale / units | X axis : linear or log 10 |
| Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts) | |
| Math channels | |
| General functions | −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, delay |
| Filter functions | Low pass, high pass, band stop, band pass |
| Graphing functions | Frequency, duty cycle |
| Multi-waveform functions | Min, max, average, peak |
| Operands | Input channel, reference waveforms, time, constants, pi |
| Automatic measurements | |
| Scope mode | AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate. |
| Spectrum mode | Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD |
| Statistics | Minimum, maximum, average and standard deviation |
| Serial decoding | |
| Protocols | CAN, LIN, I²C, UART/RS-232, SPI, I²S, FlexRay |
| Inputs | All input channels with any mixture of protocols |
| Mask limit testing | |
| Mask generation | Auto generate from captured waveform, manual drawing, manual coordinate entry |
| Actions | Highlight on screen, select in buffer overview, activate alarm |
| Statistics | Pass/fail, failure count, total count |
| Alarms | |
| Initiating events | Capture, buffer full, mask fail |
| Alarm actions | Beep, play sound, stop/restart capture, run executable, save current buffer/all buffers, trigger signal generator |
| Data export | |
| Output file formats | BMP, CSV, GIF, JPG, MATLAB 4, PDF, PNG, PicoScope data, PicoScope settings, TXT |
| Output functions | Copy to clipboard, print |
| Environmental | |
| Operating environment | |
| Temperature range | 0 °C to 40 °C (15 °C to 30 °C for quoted accuracy) |
| Humidity | 5% to 80% RH, non-condensing |
| Storage environment | |
| Temperature range | –20 to +60°C |
| Humidity | 5% to 95% RH, non–condensing |
| Physical dimensions | |
| Dimensions | 190 x 160 x 40 mm (approx 7.5 x 6.3 x 1.6 in) |
| Weight | < 900 g (approx 2 lb) |
| Software | |
| Software included | PicoScope 6 oscilloscope software with waveform database and guided tests. PicoDiagnostics software |
| Languages | Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean*, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish |
| General | |
| Additional hardware (supplied) | USB cable, user manuals, software CD-ROM |
| PC requirements | Desktop or laptop running Windows 7, 8 or 10 recommended |
| PC connectivity | Powered from PC USB port (USB 3.0 / 3.1 recommended, USB 2.0 compatible). |
| Power requirements | Powered from USB ports |
| Safety approvals | LVD compliant |
| EMC approvals | Tested to meet EN61326-1:2006 and FCC Part 15 Subpart B |
| Environmental approvals | RoHS and WEEE compliant |