ProTouch Tandem RT200

Description

PDQ has pioneered a new industry defining vehicle cleaning method with the ProTouch® Tandem. This superior wash system incorporates both touch-free and friction, giving operators who prefer the "Clean" produced by friction systems a new choice. The ProTouch Tandem's full-body detergent coverage and simplified two brush engineering provides consistent cleaning performance with minimal brush contact. On average, the ProTouch Tandem touches the vehicle up to 70% less than five brush car was systems on the market.

With the widest top brush coverage in the industry, the foam brushes are torque sensitive to monitor the contour of the vehicle and provide low-force cleaning power. The side-profiling, high-pressure wash arms effectively remove stubborn soil from the vehicle's surface. Plus, the three stage wheel cleaning system includes chemical application, rotating soft rim scrubbers and high pressure wheel blasters.

Features

• Virtual Treadle®
  • Completely open bay with no drive on floor steel
• Overhead Design
  • Removes machine from main wash zone adding to customer comfort and machine life
• Dual Bridge Design
  • The patent-pending ProTouch Tandem two-bridge design allows multiple cleaning processes to take place at one time speeding up the wash, versus a linear process common with most other friction systems. The belt driven bridges work in tandem to easily glide over the vehicle, adjusting their speeds and covering gaps to ensure the vehicle is completely covered. The ProTouch Tandem is also capable of washing over sized SUV's and dually trucks. Unlike other friction tape systems, the expansive foam top and single rotational side brush configuration creates an entirely open wash bay.  
• Hybrid technology combines touch-free and friction cleaning methods
  • Full body detergent coverage and two brush design provides consistent, high quality cleaning performance
• Single side brush
  • Provides smooth path cleaning around the vehicle with no overlapping or striping
• Complete in-bay unit
  • No equipment room needed
• Pivot and slide top washer
  • Combination motion allows slide to get back of vehicles and steep rear windows
• Triplex wheel system
  • Each tire receives a chemical application allowing dwell time followed by an intense rotational scrubbing ending with a high pressure blast
• Cross Beam Mount Standard (Free Standing Frame Optional)
  • Simple corner mount design, cross beam by distributor (cross beam included with frame mount)
• Positive Position System
  • All belt drive, no wheels to slip
• Built off of M5 and G5-S Platform
  • Same controller / electrical / ultrasonic and g5 pump logic used for solutions
• Internal Roller Design
  • All main motion items are internal to the rails
• Single side tire sensing
  • No under the vehicle sensing issues
• Large variety of service available
  • Front prep (bug prep), wheel prep, full vehicle detergent, tire scrubber, lower body blast, side blast, top blast, side light touch, top light touch, front/back wipes, 3X foam, clear coat, spot free, drying agent, fresh water rinse, stand alone dryer, integrated dryer, undercarriage, rust inhibitor, reclaim
• Electrical is direct from main panel
  • Easy electrical install and maintenance - electrical box is required only if door control, stand alone dryer or non-ACCESS entry unit is needed
• Full side profiling arms
  • Ability to profile vehicles in real time and wash even crooked vehicles
• Full motion e-chain
  • No overhead or festoon
• FlashDry® Dryer system PDQ's FlashDry system adds virtually no additional time for dryer service. The three step process begins with the back bridge applying a protectant. Next the front bridge applies a spot free rinse with rain arch, which is instantly followed by forced air from the integrated dryer. The high velocity air keeps the rinse water moving in rapid motion across the vehicle, not allowing it to settle on the vehicles surface.
  • Light touch material
• • Quiet and soft on the vehicle
• Low noise and movement inside passenger compartment
  • Eliminates aggressive noise and movement of brushes against vehicle that is viewed as damaging by the consumer .
• Advanced Tire & Wheel Scrubbers
  • New Triplex Wheel System technology takes tire scrubbing to a new level of customer satisfaction. During the process, each tire receives a chemical application allowing for dwell time, nest the wheel rim receives an intense circular rotational scrubbing, and then the full wheel receives a high pressure blast.

Optional

• Basic wheel scrubbers
• Ultimate bridge cover package
• 3x foam application
• Low pressure drive-through undercarriage
• Rust inhibitor
• 2 and 4 Producer Integrated Dryers and FlashDry® system
• Free Standing Frame
• Custom Color Side and Top Brushes
• Stand-Alone MaxAir Dryer

Warranty

90 day labor and one (1) year parts

Product Specifications

• Dimensions: 170"L x 48"W x 48"H
• Weight: 1,250 lbs.
• Recommended Height : 11' (3.35m)
• Utility Requirements (water) : 30 GPM (113.6 LPM) @ 20 psi (1.38 Bar)
• Utility Requirements (Electrical) : 3-Phase, 50/60 Hz
• Recommended Width : 16' (4.88 m)
• Recommended Length (On-Board or No Dryer) : 36' (10.97 m)
• Utility Requirements (Air) : 1.5 SCFM @ 10 psi (0.69 Bar) Minimum, 90 psi (6.21 Bar) Maximum