Item shown may not be actual product.Product and price information are subject to change without notice.
$843.48 *
*log in for dealer pricing
AC/DC Current Clamp
Item Number: FLUI30
Supplier:
FLUKE ELECTRONICS CORPORATION
Description
The i30 current clamp is based on Hall effect technology for usein measurement of both dc and ac current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.
Safety Standards
BS EN 61010-1: 2001
BS EN 61010-2-032: 2002
BS EN 61010-031: 2002
300 Vrms, Category III, Pollution Degree 2
Use of the probe on uninsulated conductors is limited to 300 V acrms or dc and frequensies below 1 kHz.
EMC Standards
EN61326: 1998 +A1, A2, & A3
Warranty
One (1) year
Product Specifications
- Specified Current Range: 30 mA to 30 A DC, 30 mA to 20 A AC rms
- Usable Current Range: 5 mA to 30 A DC, 30 mA to 20 A AC rms
- Crest Factor: 1.4
- Output Sensitivity: 100 mV/A
- Accuracy (at +25°C): ± 1% of reading ± 2 mA
- Resolution: ± 1 mA
- Load Impedance: > 10 k Ohms and ≤ 100 pF
- Conductor Position Sensitivity: ± 1% relative to center reading
- Frequency Range: DC to 20 kHz (-0.5 dB)
- Temperature Coefficient: 0177 0.01% if reading / °C
- Power Supply: 9V Alkaline, MN1604/PP3, 30 hours, low battery indicator
- Working Voltage (see Safety Standards section): 300 V ac rms ir dc
- Maximum Condutor Size: 19 mm (0.748") diameter
- Output Connection: 4 mm (0.157") safety connector
- Output Zero: Manual adjust via thumbwheel
- Cable Length: 1.5 m (4.91')
- Operating Temperature Range: 0°C to +50°C (-32°F to 122°F)
- Storage Temperature (with battery removed): -20°C to +85°C (-4°F to 185°F)
- Operating Humidity: 15% to 85% (non-condensing)
- Weight: 250g (0.55 lbs)
- Dimensions: 183mmH x 71mmW x 25mmD (7.2"H x 2.8"W x 1.0"D)